VOC Content

Test Standard: SCAQMD Rule 1113

Result: 0 g/L (Zero VOC)

Mold Resistance

Test Standard: ASTM D3273

Result: Score of 10 (no growth)

Heavy Metals

Test Standard: EPA Method 6010

Result: All heavy metals below detection limits

Lead-free, mercury-free formulation

Thermal Resistance (R-Value)

Test Standard: ASTM C518

Testing Laboratory: [Certified Lab]

Result: R-2.2 per inch thickness at 75°F mean temperature

Aged R-Value: No measurable degradation after accelerated aging

Thermal Bridging Analysis

Whole-wall R-value improvement: 15-25% compared to standard stucco

Eliminates thermal shorts at structural members

Enhanced energy modeling results available

Water Penetration Resistance

Test Standard: ASTM E514

Pressure: 10 psf for 4 hours

Result: No water penetration

Water Absorption

Test Standard: ASTM C67

Result: Less than 5% by weight

Hydrophobic barrier confirmed

Accelerated Weathering

Test Standard: ASTM G154

Duration: 2,000 hours equivalent to 5+ years exposure

Result: No cracking, chalking, or delamination

ASTM E119 Fire Test

Test Standard: ASTM E2707

Exposure: Direct flame contact, 30 minutes

Result: No burn-through, no ignition, no structural failure

Surface Temperature: Backside remained below critical threshold

Wildfire Exposure Test

Test Standard: ASTM E2707

Exposure: Direct flame contact, 30 minutes

Result: No burn-through, no ignition, no structural failure

Surface Temperature: Backside remained below critical threshold

Ember Ignition Test

Test Standard: ASTM E2726

Result: No sustained ignition from ember exposure

Classification: Ember-resistant exterior wall assembly

Bond Strength (Adhesion)

Test Standard: ASTM C1583

Various Substrates Tested: EPS, XPS, CMU, fiber cement, MgO

Results: Exceeds 50 psi on all approved substrates

Failure Mode: Substrate failure (not adhesive failure)

Impact Resistance

Test Standard: ASTM E2506

Impact Level: High

Result: No cracking or delamination at high impact

Crack Resistance

Test Standard: ASTM C1185

Temperature Cycling: -20°F to 140°F

Result: No visible cracks after 50 cycles

Standards Met:

ASTM C926 - Exterior Portland Cement Plaster

ASTM C1063 - Secondary Attachment Method

ICC-ES Evaluation Report: [Report Number]

California Title 24 Compliant

Florida Building Code Approved

International Building Code (IBC) Compliant

International Residential Code (IRC) Compliant